对于
剪板机折弯机，我们应怎样来进行保养工作呢？为什么提出这个问题，其主要原因，是因为前面还没有讲到，所以今天就利用一篇文章的篇幅，来具体和详细进行阐述，以便使得大家能够清楚明白，从而可以在实际中更好来进行这项工作。
The shear bending machine, we should be how to carry out maintenance work? Why ask this question, the main reason is because the front is not talked about, so today by the length of an article to specific and detail so that everyone can clearly understand, which can better in practice to carry out this work.
剪板机折弯机，其保养工作的内容有：
Shear bending machine, the maintenance work contents:
(1)其换油工作，初次的话，应在设备工作满一个月来进行，之后是每年进行一次。并且，在换油时，同时还要对油箱进行清洗才行。
(1) the change of work, for the first time it should be in the equipment work for a full month, then once a year. And, in the oil, but also on the tank for cleaning.
(2)其所使用的液压油牌号，应根据实际情况来确定。
(2) the use of hydraulic oil brand, should be determined based on the actual situation.
(3)应随时注意系统油温，正常应在35℃—60℃这一范围内，高不能超过70℃。
(3) should always pay attention to the oil temperature, normally at 35 C and 60 C in this range, the maximum not more than 70 DEG C.
(4)其进行油液更换的同时，要对过滤器进行彻底地清洗。
(4) the oil to replace the same time, the filter must be thoroughly cleaned.
(5)
剪板机折弯机使用一个月后，应检查油管弯曲处有无变形。使用两个月过后，应检查紧固件是否紧固。
(5) after the plate bending machine is used for a month, it should check whether there is no deformation in the pipe bend. Use two months later, should check whether the fastener.
